Contact Us
Mob: +8618120715609
Address: Building B805, Jianye Building, Torch Park, Xiang'an District, Xiamen City, Fujian Province, China
Blast Drying Oven

Blast Drying Oven

1.220V 50HZ
2.Powder: 4800W
3.Electric Blast Drying Oven

Laboratory Blast Forced Hot Air Drying Oven

Laboratory Hot Air Oven.jpg

Laboratory Hot Air Oven.jpg

Blast Air Drying Oven are used for material tests, in industrial and mining enterprises, laboratory, scientific research institute, etc for drying, baking and wax-melting, sterilization etc.

*Cabinets inside are made of mirror stainless steel argon-arc welding, outside are the high quality steel, aesthetical and novel shape.

*Independent limit temperature alarm system, automatically interrupt temperature exceeds the limit, ensures experiments run safely without accidents. (optional).

*Hot air circulation system consists of continuous operation in high temperature fan and the suitable air duct. Working chamber temperature uniformity.

*With RS485 interface


Electric Blast Drying Oven  TOB-DHG-9640A

Source voltage

220V 50HZ




One Year limited warranty with lifetime support

Work box size


Oven size


Temperature range


Temperature resolution


Temperature fluctuation


Temperature controller

30 segment programmable temperature controller. 
Self tuning function. The timing time can up to 9999 minutes

Inner box material

High quality mirror stainless steel plate,  smooth surface, easy to clean

Outside material

High quality cold-rolled steel plate, the surface electrostatic spray, hard and firm coat, with strong anti rust ability


A grade PT100 Platinum resistance

Heat pressure layer

High quality insulation system, inner box, inner shell,ultra-fine glass fiber, 
Aluminum foil aluminum reflector, air - interlayer from inside to outside.

Observe window

The box door are provided with double-layer tempered glass observation window, 
can observe the test result easily

Heating mode

Electric heating. Nickel chromium alloy electric heater

Safety installation

With over temperature protection, grounding etc.

Wind duct

Forced air circulation channel, ensure that the studio uniform temperature; 
air duct provided with a heater, temperature sensor

Adjustable air intake

The control box and outlet air quantity, the casing is provided with an exhaust 
can close or adjust discharge mouth to change wind effect.



Timing range


Ambient temperature


Lab Drying Oven


With Customized plug and voltage

electric drying oven

Laboratory Hot Air Oven

Hot Air Blast Drying Oven

Provide One-stop Solution For Lithium ion Battery Making

Forced Air Drying Oven



Chamber furnaces with air circulation are characterized particularly by their very good temperature uniformity. As a result, they are well suited for processes such as calcination and drying e.g. ceramic materials. The design as a debinding furnace for safe debinding in air or in an inert atmosphere is possible. When used for debinding in air the exhaust gases are diluted by fresh air to reliably prevent an inflammatory atmosphere in the furnace chamber. For debinding processes that have to take place under inert gas, the IDB passive safety concept with a residual oxygen content of max. 3 % is recommended.

Tmax 450  °C, 650  °C, or 850  °C

Stainless steel air-baffles in the furnace for optimum air circulation

Swing door hinged on the right side

Base frame included in the delivery, N 15/65 HA designed as table-top model

Horizontal air circulation

Temperature uniformity up to +/- 5 °C according to DIN 17052-1 (model N 15/65 HA up to +/- 7 °C)

Optimum air distribution enabled by high flow speeds

One removable tray and rails for two additional trays included in the scope of delivery (N 15/65 HA without removable tray)

Defined application within the constraints of the operating instructions

NTLog Basic for Nabertherm Controller: Recording of process data with USB-flash drive (NA 30/45 - N 675/85 HA)

Additional equipment (not for model N 15/65HA)

Optimization of the temperature uniformity up to +/- 3 °C according to DIN 17052-1

Fan cooling to accelerate the cooling process

Motor driven exhaust air flaps

Manual lift door (up to model N(A) 250/.. (HA))

Pneumatic lift door

Adjustable air circulation for sensitive components

Additional removable trays

Roller conveyor in furnace chamber for heavy charges

Designed for Tmax 950  °C

Debinding packages with safety concept starting from 120 liters volume, see page 6 - 8

Process control and documentation via VCD software package or Nabertherm Control Center (NCC) for monitoring, documentation and control

Box with high temperature function like sterilizing chamber, drying oven, many people think that they are same products, in fact, they are different in many aspects. Drying ovens always been divided into vacuum drying oven for laboratory blast drying oven for laboratory. Henan Lanphan has summed up the following table to help you distinguish vacuum drying oven for laboratory, blast drying oven and sterilizing chamber, especially the difference between vacuum drying oven for laboratory and blast drying oven for laboratory

Main features of high temperature blast drying oven laboratory drying ovens:

1.Blast drying oven working room uses high-quality steel plate or stainless steel plate.

2.Microcomputer intelligent temperature controller. Setting and measuring temperature shows in screen, timing,

power control and other functions, which makes temperature control accurate and reliable.

3.Hot air circulating system consist of low noise blower and air duct, ensures temperature uniformity effectively.

4.Independent alarm system for temperature limiting, automatically interrupt operation when exceeding the limit.

ensure the safety of the experiment (optional).

5.RS485 interface may link the recorder and the computer, records the changes of temperature parameter.

Hot Tags: blast drying oven, suppliers, manufacturers, factory, price