Contact Us
TEL:+86-592-7311160
Mob: +8618120715609
E-mail: tob.amy@tobmachine.com
Address: Building B805, Jianye Building, Torch Park, Xiang'an District, Xiamen City, Fujian Province, China

Vacuum Planetary Mixer for Supercapacitor

1. Design total volume: 8L
2. Elective volume:2.7L-5L
3. Container inner diameter: 240mm
4. Container inside depth: 180mm

Planetary Vacuum Mixing Machine For Supercapacitor

TOB MACHINE tile.jpg

TOB Product information.jpg

Application

Various types of common battery powder and liquid mixing,eventually get a mixed uniform battery slurry. It is suitable for high viscosity process.


Main Parameter

Model

TOB-XFZH05

Lower Barrel Parts

Design total volume

8L

Elective volume

2.7-5L

Container inner diameter

240mm

Container inside depth

180mm

Container material

The parts in connect with materials is 304 stainless steel

Tempering jacket form

The bottom and the barrel jacket can input water for cooling, heat preservation and heating

Tempering jacket port

G3/4"with quick opening movable joint

jacket withstand pressure≤0.4MPa

Tempering jacket circulation system

prepared by customer

jacket water inlet temperature≤8℃

cooling water flow3.5L/min

Discharge materials form

²bottom of a G1-1/2" three-piece discharge ball valve, equipped with 2 "standard ISO quick connect clamp connector

Design environment temperature

-10+120°C

Move mode

Casters move

Mixing Parts

Working frequency

5-50hz

Mixing power

1.5kw

Mixing blade speed

10-98rpm

Planetary box rotate speed

5-50rpm

Mixing blade diameter

124mm

Mixing blade model

Variable cross-section spiral twist type, 90 ° helix

Mixing blade material

304 stainless steel

Mixing blade line speed

²0.06-0.6m/s

Mixing blade number

2pcs

Dispersing Parts

Working frequency

5-50hz

Dispersing power

2.2kw

Dispersing rotate speed

610-6100rpm

Dispersing plate diameter

70mm

Dispersing model

Serrated

Dispersing plate material

304 stainless steel

Dispersing line speed

2.2-22m/s

Dispersing number

1pcs

Dispersing shaft number

1pcs

Scratch the Wall Parts

² Scratch wall bracket material304 stainless steel

² Scratch wall materialTeflon

² Scratch wall rotate speed:Consistent with planetary box rotate speed

² Removable or not:Removable design (Need to remove when scraping the wall on high viscosity process)

Base and Lifting Parts

² Parts materials:High rigidity structural carbon steel

² Lifting wayelectric

² Lifting guideHigh-precision linear guide

² Lifting itinerary290mm

Upper Barrel Parts

² Upper barrel material:304 stainless steel

² Power feed port: quick opening interface DN40 1pcs

² Liquid feed port:ISO standard 1/2" quick interface 1pcs

² Mirror port: DN50 tempered glass sight glass 1pcs

² Vacuumize port:G1/2 " 1pcs

² Exhaust port:together with vacuumize port

² Digital vacuum gauge port:M14×1.5 Internal thread metric tooth interface 1pcs

Control System

² Electrical cabinetUsed to install low-voltage electrical components such as inverter

² Manual operation panelFor placement buttons, knobs, gauges etc

² Power supply:AC 3×380V±5﹪,50Hz

² Control mode:electronic control

² Power control and speed adjustment mode: Inverter start and control

² Cooling mode:Air-cooled (wind cooling)

² Operation mode:Touch screen

² Digital temperature display gauge:material temperature

² Emergency stop button1pcs

² Alarm system:Over-temperature alarm, over-temperature alarm shutdown, alarm shutdown

² Speed display: Touch screen shows the speed

Power instructions: 1pcs

Safety Chain System

² Emergency stop: press the emergency stop switch, the device immediately stop, and can not do anything

² Start low-speed mixing: can lift the barrel and turning at the same time

² High-speed dispersion: barrel up in place before turning

² Safe lock in operation: When the machine is running, the mixing barrel can not be lowered, can not open the mixing barrel.

² Prevent vacuum tube backflow: special vacuum buffer tank design, can effectively prevent the vacuum pump oil back to the mixing drum phenomenon

² Stop running fault: Inverter comes with overload, overcurrent, overvoltage, leakage, lack of equal protection

² Mixing barrel lift: stirring barrel in place to rise

² Mixing barrel did not return to normal pressure can not be dropped.

² After mixing barrel rises in place and high-speed dispersion, then can be started.

² After mixing barrel rises in place, with locking protection system, to prevent while the mixing barrel rises to high place abnormal fall.

² Dry mixing stage, while the barrel rising, the stirring paddle need to rotate at the same time.

 

Other description

² Temperature probePt100

² Temperature measurement: Located of the barrel wall to detection of internal material temperature

² Transmission parts bearingsHigh-speed components for imported bearings, low-speed components for domestic bearings

² Oil seal:Domestic brandsO-ring for Static sealdynamic seal using mechanical seals or skeleton oil seal

² GreaseDomestic brands

² Mechanical seal lubricantsImported brand

² Petrol cylinder:Domestic brands

² Petrol stationDomestic brands

² Valve:Domestic brands

² acuum design quantity demand:vacuum system prepared by customer own, air exhaust volume 2L/S2X-2)

² Vacuum hold:-0.098Mpaholding pressure for 24 hours>-0.085Mpado not leak to the barrel

² Total host power:>4kw

² Total weight: about 700kg

² Dimensions:L1463mm×W610mm×H1770mm

² Appearance color:off-white

² Ground bearing:900kg/


Complementary condition

No.

Project name

standard requirement

1. 

Workshop height

>2.5Mmachine lift requires a certain height to ensure and consider the maintenance needs; neat, smooth.

2. 

Door size

height:>2Mwidth:>1Mto ensure the machine in and out.

3. 

Cooling water

To ensure cooling requirements, it is best to force the cooling water supply system; winter for insulation, needs hot water supply.

4. 

Warm air

Cold weather for the north of winterin order to lift the hydraulic oil does not appear condensation phenomenonmust ensure that the indoor temperature>20 ºCto ensure the machine lift and drop smoothly;and the normal operation of lubrication system.

5. 

Gas source

57 kgf/cm²100 l/minPneumatic pump drive and other occasions

6. 

Other

Non-corrosive gas, liquid, explosive gas.


What TOB Can Provide:

 

TOB NEW ENERGY;20 Years Service For Battery Industry

 

Suit for Battery Type:Pouch,Cylinderical,Polymer,Al shell, Machines:Battery and Super Capacitor Lab Equipment ,Manual,Semi-suto,Auto machine and line,Battery Testing Machines.

 

Battery Production Line;Supply"Turn key"Project service.

 

Technology:Batttery Technology consulting,Guidance,Training,Transfer...etc

 

Materials: Battery and Super Capacitor Materials(A full set)

 

Select TOB NEW ENERGY On the choice of a high-level battery team!


TOB Product display.jpg

vacuum mixer


Vacuum Planetary Mixer.jpg

TOB Product Packing.jpg

Vacuum Planetary Mixer


TOB Certificates.jpg


Vacuum Planetary Mixer



Hot Tags: mixer,v mix,industrial powder mixer,vacuum mixer homogenizer,powder blender equipment1,industrial planetary mixer,vacuum planetary mixer
Inquiry